Lumag FS200-900 tile saw
- Article number: FS200-900
Lumag tile saw machine FS200-900
Lumag tile saw machine FS200-900 is a powerful tile saw machine with a maximum cutting length of 90 cm and a maximum cutting depth of 2.5 cm. An ideal machine for cutting tiles, natural stone, ceramic tiles (up to large format and diagonal cutting) etc
The table top has a rubber top layer which prevents the tile from sliding. Thanks to the upper arm construction that is equipped with ball bearings, you can saw very accurately. This is of course very important when cutting tiles. The machine can be used with 200 mm saw blades that have an axis hole of 25.4 mm.
The water basin is equipped with a maintenance-free water pump. The water basin consists of two parts that are connected to each other. The water pump is located in a small separate part of the container. The advantage is that the saw residues sink into the large part of the water basin and the pump therefore pumps the water into the less dirty part of the basin. The machine has a continuously adjustable miter possibility of up to 45 °. The legs are foldable and in addition, one side of the water basin is equipped with wheels for easy movement of the machine. There is a quality longitudinal conductor included that you can secure at two points but also a miter conductor. The machine is of course equipped with a PRCD safety switch.
The motor can be adjusted in height so that you can also "fall in" with the sawing machine. For example, you can start a cut in the middle of a tile. The Lumag FS200-900 is very easy to clean because you can easily remove both countertops on the machine without tools. The machine is also equipped with wide handles on the back and front for easy transport of the sawing machine.
The machine is supplied as standard with a tile saw blade (with closed edge for wet sawing).
|Engine type||230 Volt electric motor (16A)|
|Engine power||1100 watts|
|Speed no-load||3000 rpm|
|Max cutting depth||25 mm|
|Max cutting length||900 mm|
|Miter possibility||Yes, 0-45˚|
|Saw blade diameter||200 x 25.4 mm|
|Dimensions sawing plate (L x W)||N / A|
|Dimensions work table||87 x 38.5 cm|
|Dimensions saw table (L x W x H)||133 x 50 x 120 cm|
|Dust and water splash density||IP54|
|Contents of water bowl||45 liters|
|Safety switch||Yes, PRCD switch|
|Noise level LWA||106 dB (A)|
|Saw blades supplied||1 tile saw blade|
|Insertion possibility saw blade||Yes|
|Pack sizes (L / W / H)||137 x 54 x 60 cm|
|Gross weight||56 kg|