SNAP SAW MACHINE SSA500GHPRO

LUMAG SNAP SAW MACHINE SSA500GHPRO

This unique professional petrol saw and splitter SSA500GHPRO from Lumag combines three machines in one.
The machine cuts your wood to the desired length and then splits the sawn piece of wood into 2 or 4 parts (also available as an option with a 6-part splitting cross).
The machine has a hydraulic supply conveyor belt (wood supply up to the saw) and discharge conveyor belt (after splitting).
The sawing and clamping of the wood is also hydraulic and automatic.
The saw-splitter is equipped with a powerful 13 hp petrol engine, which means that it can be used anywhere.

With this very powerful 13 hp petrol saw splitting machine you can split wood very safely, but of course your splitting yield is much higher than if you have to perform both operations (splitting and sawing) separately.

You can supply logs up to 50cm in diameter with the supply belt which continues up to the saw.
With a hydraulically driven (and automatically sawing chainsaw) you saw the log to the desired length, the wood then falls in front of the splitting device, which will split the wood with a hydraulic splitting force of 20 tons. Then the wood comes on a 3.2 meter long conveyor belt that transports it to a location of your choice (you make a mountain of split wood or drop the wood directly into transport or trailer).
The maximum discharge height is 2 meters.
The conveyor belt can be easily adjusted to height by means of the existing winch.
Splitting and sawing can be done simultaneously by using two hydraulic pumps.

The machine can split up to 5-8 cubic meters per hour on average.
Of course, factors such as speed of supply, trunk thickness and type of wood are important.
The machine stands on a transport undercarriage and is equipped with a towbar coupling (only to be used on your own property).

The machine can use various optional accessories such as a hydraulic log lifting installation, a hydraulic log feed table and a 6-piece splitting cross.
A combination of 2 and 4 piece splitting cross is standard with every machine.

The 3 way control valve + Parker Pump & hydraulic motor that you see in the picture is delivered directly with the machine.

This machine is only supplied by an authorized Matom dealer.
The machine is delivered to you fully assembled.

Type Engine
Petrol engine 1-cyl. 4-stroke OHV
Displacement
420 cm3
Engine manufacturer
Loncin ( 3 year warranty!)
Tank capacity
3.6 litres
Fuel type
Euro 95 / 98 /Alkylate petrol (Aspen 4)
Start system
pull starter
Machine dimensions (L x W x H)
Conveyor belt: 3200 x 200 x2800mm
EAN code
4047424007372
splitting power
20 Ton
Chain
C3621 000 0077/0.375/1.5mm (Stihl)
max. assets
13 hp
sword length
55cm
art. no.
SSA500GHPRO
Pack sizes (L/W/H)
Machine: 2000 x 1000 x 1200 mm, Conveyor belt 1850 x 450 x 570mm
Motorcycle chainsaw
Hydraulic, max. 4,500 rpm.
max. loading height
2 meters
Conveyor belt speed
Hydraulic motor, max. 284 rpm. per min./110 bar/ 285Nm, 0.8 m. per sec.
Saw/split cross section
max. 500mm (min. 100mm)
Split speed forward
5 cm/sec.
Split speed backward
4 cm/sec.
max. gap length
550mm
Weight Net
730 Kg (620 Kg + conveyor belt 110 Kg)